Sparky The Newb
#12
no i have no leaks and i was looking around and i seen most say that stock turbo is around 18-20 set factory. but my question is how can i take my stock turbo and make it get around 30-32 to stay in safe zone for stock bolts an gasket. i seen an arm connected to the waste gate but i would have to take the turbo off every time i do or need an adjustment i was wondering if there is an easier way to get my stock turbo to do 30psi of boost? and lastly anyone have a set of rv 275 injectors for sale or know a dealer i cant find any dealers to order from on google. thanks agian.
Sparky
P.S. my air intake i did the BHAF with my custom made heat shield for now letting her breath real good now . hear more whistle to. thanks for all the advise.
Sparky
P.S. my air intake i did the BHAF with my custom made heat shield for now letting her breath real good now . hear more whistle to. thanks for all the advise.
#14
Stock I hit 20psi, blocking off the waste gate got me around 32psi with just the quad box. After the jammer 5's were installed I could hit 21psi with the box off and 42 with the box on. I haven't blocked off the waste gate since the injector install but I can tell you the previous owner of my wifes truck blocked the waste gate off and didn't tell us. When we installed the adrenaline in combo with the 100hp injectors that were already in it we were lifting off the throttle when it was hitting 47psi . Edge sells a boost elbow that will allow you to push higher than stock and several other companies make adjustable boost elbows. Post up in the dealer section about those injectors and a boost elbow, I'm sure they would be more than willing to give you a quote.
Thread
Thread Starter
Forum
Replies
Last Post
wiremanWelder357
5.9 Liter CR Dodge Cummins 03-07
3
05-25-2015 09:10 PM