Hey 2nd Gen 24V Cummins Guys .. What's Your Next Bomb?
Just Curious What You have planned as your next bomb ..
|
150-200hp Injectors and a Turbo
|
Thats 2 things Luke Doing them both at the same time?
|
Ya ive already got a set of 150's. Trying to decide on Turbo and figure out if im gonna need a new VP
|
I wanna do some bigger injectors, probly 220'-240's. the Mach 5's just dont cook my biscuts anymore.
|
South bend DD clutch hopefully a 3850#:U::choochoo:
|
Oh wait I was wrong 20x9 pro comp 6001 wheels and 305/50/20 toyo proxes ST II tires. They should be on mid week :)
|
Snow stage 2 with a 7 galloon res.
|
twins, phaft shat 62 with a k31 secondary, 240 hp injectors, south bend clutch (3850 or whatever is good for 750 plus), billet shafts through out the nv4500, dynotrax manual hub concersion, wait, guess i cant count, hehehehe
|
:humm: thinking injectors
|
Im planning on doing a 5spd swap by the end of the year and in January use my 66 turbo as the top charger and an s480 as the bottom.:rocking::rocking:
|
Nothing too fancy here but a complete Goerend Brothers trans. :U:
|
Hamilton cams big stick, 110 bee hive springs and chrome moly push rods. oh ya and studs and orings and a complete port and polished head. with shaved off intake? i have plenty of fuel and air i just need it to flow in & out of the cylinders better
|
SBC DD CLUTCH
|
ranch hand bumper. then probably adrenaline
|
4 new shocks (Bilstein) and a 3rd gen sway bar conversion.
|
p-pump conversion or Iron Giant clutch upgrade depending on my luck...
if the clutch holds til winter, the p-pump will be done first, if the clutch gives up before pulling season ends then that goes in first |
all synthetics and hopefully a leveling kit. Id say its pretty reasonable for right now... Not sure what leveling (kit) I should go with tho, looking at anything from just the blocks to the kits...
|
I'd like to fire ring the head and throw in some twins. The tough part is trying to get down time with the truck. Might be a winter project:humm:
|
bigger injectors, turbo, and rebuild the front end
|
twins. custom built by me.
|
putting a 88 mm under my 64 new cam fully ported 6.7 head maybe some giggle juice, umm a hole in the floor board so when i do a wheelie down the whole track i know where im going =P:rocking: oh and if i get bored of my vp i got a custom built 13mm p pump laying around and a 12v cover and gear........:bat:
|
Just got a complete engine, sittin in the garage, I'm thinkin puttin' in beehive valve springs, Helix2 cam,(already bought the cam, bolt on gear) lots of porting on the head, or a CR head, or a 6.7 head, ceramic coated pistons, fire rings, and O-rings, balance and blueprint the bottom end, fluidampr, maybe a stage 1 monster pump?? maybe bore the cylinders?? this engine will replace my cracked 53. Any input is welcome!:c::U:
:pca1: |
putting a 88 mm under my 64 new cam fully ported 6.7 head maybe some giggle juice, umm a hole in the floor board so when i do a wheelie down the whole track i know where im going =P oh and if i get bored of my vp i got a custom built 13mm p pump laying around and a 12v cover and gear........ BTW......A little birdie told me you may do a conversion on the trans...True/false... I may be doing one myself. And we could help eachother out. |
Saving up for a Goerends trans and maybe a new turbo. Probably get rid of my Adrenaline and go back to the Comp/Smarty stack. It worked a lot better than that freakin surge problem i'm and lots of others are having.:booo:
|
I have the parts just need to install my Airdog 150 and leveling kit along with shocks:argh:
|
Originally Posted by 2141pete
(Post 198702)
I wanna do some bigger injectors, probly 220'-240's. the Mach 5's just dont cook my biscuts anymore.
lol |
Originally Posted by mysterync
(Post 201255)
I've got just the set for you......maybe a "wee bit" bigger
lol |
Originally Posted by biged681985
(Post 199016)
ranch hand bumper. then probably adrenaline
|
Goerend trans parts and then and HT3B paired up to my stock HY.:U:
|
Well my new mod is here and ready I just have to get them mounted and balanced.
|
:humm:Im thinking water/meth, Up-graded intercooler, HTT 3-pice manifold, Helix II cam, And some day put a Garrett GT4202R under my GT3788R
|
These are the things I want BAD!
Traction bars Billet Output shaft Bigger injectors New rims 18s or 20s I cant decide Street Scene front bumper painted to match the truck |
hmmmm, either exhaust, smarty or clutch....not sure which will come first yet
|
Originally Posted by CumminsCrazed
(Post 205979)
hmmmm, either exhaust, smarty or clutch....not sure which will come first yet
Clutch |
Silver Bullet 66 but first head studs
|
I want to get my Trans rebuilt with the BIG shaft and a good DD to go with it.
I already started the fund.:U: |
Walbro Fuel system, DD clutch and a turbo! Hopefully a GT3788R but I'll have to see what happens when I get there. I also want some 35's!:U:
|
S4t turbo to go under my bullet, water/meth, get rid of the automatic for a nasty 5-speed,stack thru the hood:U:, P-PUMP:rocking:
|
Is a new throwout bearing a bomb? LOL,seems like I change em all the time.
|
All times are GMT -5. The time now is 06:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands