5.9L 24V Performance Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps Related To Performance And Longevity

Injectors?

Thread Tools
 
Search this Thread
 
Old Feb 8, 2013 | 01:25 PM
  #1  
jfollowell's Avatar
Thread Starter
|
Diesel Fan
Joined: Feb 2010
Posts: 39
Likes: 0
Default Injectors?

Hey fellas I'm sure this question has done been asked, but I'm looking to get bigger sticks here in the next few weeks. Just kinda curious what brand everyone is running? Thanks for any input.
 
Reply
Old Feb 8, 2013 | 02:04 PM
  #2  
KillStroker's Avatar
Diesel Enthusiast
Joined: Feb 2011
Posts: 382
Likes: 18
From: Davenport, Iowa
Default

I ran Southern Diesel Xtremes in my 02 I nvr had a problem with them. They were decently priced. I picked them up from Scott @ Alligator
 
Reply
Old Feb 8, 2013 | 02:14 PM
  #3  
shellinger's Avatar
Diesel Enthusiast
Joined: Sep 2012
Posts: 215
Likes: 14
From: NY
Default

are you planning on upgrading your turbo eventually? if you are i would go with ddp 150s. my buddy put his 150s on his with a stock hx 35 and it went from little play to in and out death play with in a month because he was boosting up to 55psi. but if you upgrade turbo then they are fine. he swapped his turbo out for he351ve and now he could use more fuel with veins open he doesnt get much smoke at all.
 
Reply
Old Feb 8, 2013 | 05:09 PM
  #4  
jfollowell's Avatar
Thread Starter
|
Diesel Fan
Joined: Feb 2010
Posts: 39
Likes: 0
Default

Killstroker everything I've read about sdx injectors has all been positive stuff... Shellinger I'm eventually gonna upgrade my turbo. Prolly gonna run a phatshaft 62/14. Actually thought about a 64 but not real sure. I know it'll be hard keeping my foot off the go go pedal. But I was gonna do injectors and studs first then when funds come back around was gonna do a turbo.
 
Reply
Old Feb 8, 2013 | 05:51 PM
  #5  
shellinger's Avatar
Diesel Enthusiast
Joined: Sep 2012
Posts: 215
Likes: 14
From: NY
Default

Originally Posted by jfollowell
Killstroker everything I've read about sdx injectors has all been positive stuff... Shellinger I'm eventually gonna upgrade my turbo. Prolly gonna run a phatshaft 62/14. Actually thought about a 64 but not real sure. I know it'll be hard keeping my foot off the go go pedal. But I was gonna do injectors and studs first then when funds come back around was gonna do a turbo.
ahhh yes and head studs. sorry i forgot to mention that. those are a must when pushing over 45 lbs of boost. dont want to pop the head gasket!
 
Reply
Old Feb 8, 2013 | 11:49 PM
  #6  
KillStroker's Avatar
Diesel Enthusiast
Joined: Feb 2011
Posts: 382
Likes: 18
From: Davenport, Iowa
Default

I pushed SDX 150 and a phat shaft 62 to 54 psi according to my edge CS now u have to adjust for some fudge factor but every newbie that went for ride had wide eye and a smile on there face. Ran good till stock tranny took a vaca
 
Reply
Old Feb 10, 2013 | 06:56 PM
  #7  
RollinCoal99's Avatar
Diesel Enthusiast
Joined: Jan 2011
Posts: 295
Likes: 5
From: ellington Ct
Default

Southern Diesel Extreme is out of business.. i would go with a set of 100s from ddp
 
Reply
Old Feb 10, 2013 | 09:26 PM
  #8  
jfollowell's Avatar
Thread Starter
|
Diesel Fan
Joined: Feb 2010
Posts: 39
Likes: 0
Default

I plan on goin 150's just for the fact that I don't tow very often. I appreciate all the feedback from everyone.
 
Reply
Old Feb 11, 2013 | 09:53 AM
  #9  
jkidd's Avatar
Diesel Bombers Sponsor
Joined: Jan 2008
Posts: 1,100
Likes: 77
From: Kaysville UT
Default

150HP and 62mm or 63mm turbo would be good.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Renteria1217
5.9 Liter CR Dodge Cummins 03-07
19
Oct 13, 2015 01:36 AM
Militant83
For Sale
0
Mar 18, 2015 03:34 PM
klein444
Chevy/GMC 6.2L and 6.5L
6
Mar 8, 2015 11:42 AM
nate379
For Sale
0
Feb 15, 2015 03:23 PM
nate379
For Sale
0
Feb 9, 2015 08:27 PM




All times are GMT -5. The time now is 09:11 AM.