Hood stack
#11
#12
Yeah that's what I'm looking at... That's not right.. Unless he was aiming for the middle of the hood. I think I'm just going to make one myself. Question though. I'm not sure the name of it but the last piece of the turbo closest to the cab that the down pipe connects to there is 4 bolts in that piece can you rotate that so the pipe comes out towards the fender?? Then FBI the rest of the pipe from there?
#15
no with the bent it went towards the valve cover by coolant hose by manifold then out hood so almost to middle but not quite. and the exhaust off the turbo was turned some to. if i remember ill get pics tomorrow at work i still have the hood on the truck i got a new one but i need to sand down n prime
#19
On my 78 chevy that we stuck a cummins into took a stock down pipe cut it up a bunch and made it fit via my arc welder now it barely sticks out the hood and I welded on a piece of 5" to the hood so it can open close without a big gap. Didn't take too long and since I am running a divorced passenger drop case was much simpler than trying to route around the t case.
Thread
Thread Starter
Forum
Replies
Last Post
hollywoodbusa
Wanted To Buy (WTB) - Used
0
02-22-2015 08:05 PM
ramrunner01
24 Valve 2nd Gen Dodge Cummins 98.5-02
3
01-19-2015 05:01 PM