the way i am doing it you would ot have that. you would run your hose from th top of the head to the turbo then you would run from the bottom of your turbo to your fre wall keeping all the heat way from the hose and alowing the turbo + the engine heat to heat your core for a faster heat up in the winter. does the vane in side turn or just slid in and out?

 

this video shows how the vain works inside. Its from Fleece when they were developing the controller for the he351ve

 

right on so why does it requiree water? that dont matter but it does.. ill let yoiu know how my water runnig goes. i wanna hook this up now but got to wait for the controler... by the way what is that shinny thing in your cab?

 

The coolant is required to cool the electronics. What shiny thing ?

 

look at your picktures of the controler **** there is a big shinny lever?

 

so where sould i get my rubber boots? i messured and found thath it is 2-3/4" off the turbo and 3" pipe. i want to use my stock inter cooler boot and use 3" exhaust with hommade bends to the turbo but where can i find a 2-3/4" to 3" 45* elbow boot?

---AutoMerged DoublePost---

have an idea!!!

what about 3" silicone hose with a 2.75"-3" boot addapter

i would take and put the 2.75""-3" 45* boot on the turbo and then run a 2" long piece of3" (for a joint) then run the silicone hose to a 2" long piece of 3" tube (for a joint) to my inter coller boot!

 

You talking about the switch below the ****? Thats the exhaust brake switch.

---AutoMerged DoublePost---

Go to silicone intakes.com. Thats where I got my boots.

 

ok i found the rubber boot i need. were can i get 3" flexable line that will with stand 40psi?

 

I dont know of any. You still have your old pipes right? Your stockers are still on the truck?

 

yes they are. i am thinking of using it and just cutting and welding to make it work that way i can buy the boot and be done buying ****.