Hey guys,

I Got a 1996 12 valve building my list of mods. any input to this is greatly appreciated. Still new to cummins, so Do i need a AFC spring? the 60lbs yes.. the 4k GSK yes.. for fueling purposes. Anything else im missing? looking for about 400HP at wheels should put torque close to 700?




12- 60lb Intake & Exhaust Valve Springs 89-98 12V Dodge Cummins
$110.00

4K GSK RPM Governor Spring Kit 94-98 Dodge 12 Valve Cummins
$115.00

AFC Spring Kit 94-98 Dodge 5.9L 12 Valve Cummins Diesel
$35.00

MBRP DAL401 94-02 Dodge Cummins Aluminized 4" Turbo Downpipe
$105.72

Dodge 5.9L 12 Valve Cummins Killer Dowel Pin KDP Repair Kit
$105.00

94-98 12 Valve Dynomite Diesel 75hp Stage 2 Injectors DDP2
$569.05



Sub-Total: $1,065.77

 

save yourself some money an build your kdp kit. buy the crank seal an timing gear cover gasket an build your own tab to hold the dowel pin in. my uncle bought one an wished he didnt after he saw how i did mine saved atleast $50

 

Can you enlighten me... What's a kdp?.. Also any tips for making the plate for dowel pin?

 

KDP is the dowel pin, Killer. Dowel. Pin. named b/c iot can kill your engine

 

Any input on a turbo upgrade? The buildup is moderate mods.. Looking for the 400-750 hp range eventually. Would like a turbo that can run with the 75hp injectors, but will really shine if I ever go to 140hp/ 90 hp injectors...

 

400-750horse? Thats a big range.

 

400hp and 700 ft/lbs is what he is after ... or 400 hp on fuel and 750 on a good ole shot

 

a 62/65/12 would work nice for what u describe

 

Answers in bold, saves 80 bucks right there. I don't even know what to recommend for a turbo to only get you to 400hp . But a 62mm is a well proven turbo.

 

Nitrous is for wussies