96 Cummings. What's a good injector for it? S300 64/71/14 turbo, no fuel plate, 2095 Mack plug, head studs and head work will be done as well. In the future I'm putting dv's, and 4gsk. Thanks


Brandon

 

i'd say 5x14s would probably be good for that turbo. do yourself a favor n get the 4k gov springs now.

n please please please dont put a G in Cummins.

 

Does your truck have a 5 speed or is it a auto? Ifs it a auto the 64mm turbo will be laggy and hot until the turbo lights especially with a stock cam in it etc. If its a manual you will be better off with that size turbo. I would look more into a 62 if you have a auto IMO. Also if you have a auto I would suggest a good convertor and a valve body to help out the trans ends of things

 

Lol my phone does auto spell in the cummins g. It's a 5 speed manual trans. I already have that turbo on it. 64/71/14 and it's laggy already so idk. And break down the 5x14 for me?


Brandon

 

5x14 would be about a 140-150 HP injector.. They should be a 5 hole nozzle design with 0.014" holes in the nozzles

 

10-4


Brandon

 

SDX makes a set of 5x.014's for about $500, and they're dang good injectors from what I hear.

 

yes they are, ran there stuff in my truck all last year and will again this year

 

Thanks guys, Dave can't wait to see what she'll do this year.

 

I'm putting 7 hole injectors on my truck. I hear that they light turbos faster, but not quite the raw power that an equivalent 5 hole.

Hopefully know more next week when the get here.