what would be the smallest set of injectors one could run with a super phat shaft industrial injection turbo 62/71/14

 

160hp injectors from a 94 or 95

 

wouldnt be enough fuel with stock injectors to spool a super phat shaft

 

5x12

 

i have a regular phat shaft 62 with 5x14's. a super phat shaft is bigger than that so i would have to say 5x.014's on the bigger turbo. im sure 5.012's could do ok but id go with a lil more injector on the bigger turbo

 

160s would do it and they would be the smallest you could use which is what you asked.

 

im trying to cool this puppy down for towing i dont think the industrial injection 370's are the coolest injector made

 

No doubt... I'd look for SDX or similar, which are better suited to street and towing use, with the proper spray angle and tested pop and spray patterns.

 

well the industrial injections are the correct spry angle not for the amrine pistons all ready talked to industrial injection about it. anything to cool my egts down

 

Industrials are based off a marine nozzle. Just sayin.