fuel lines
#1
#2
yeah when I replaced my fuel lines they were all very rusty.
If you have the extra coin now would be a good time to upgrade your fuel pump to and air dog or fass system. they come with everything you will need to replace all the old lines, just not the return lines.
Or just buy some fuel hose and run some new lines
If you have the extra coin now would be a good time to upgrade your fuel pump to and air dog or fass system. they come with everything you will need to replace all the old lines, just not the return lines.
Or just buy some fuel hose and run some new lines
#3
OEM supply is 3/8" and return is 5/16". Dont use regular fuel line for a gas jobbie. diesel rated fuel line is the best. You can get it from:
Vulcan compound turbo components, AirDog Systems, FireBall injectors, DrawStraw? Big Line Kits, VP silicone boot kits, gauge installation components, metric adapters & fittings, FASS, Quadzilla, Edge,AirDog, DTT Trans, ISSPRO, HTT Turbo, AFE, Veg pum
or from here:
MMI Marine - TRIDENT RUBBER,INC - 365-0565 TRIDENT "BARRIER LINED" TYPE A1-15 MARINE FUEL LINE HOSE, 5/16 X25 (REEL BOX)
Vulcan compound turbo components, AirDog Systems, FireBall injectors, DrawStraw? Big Line Kits, VP silicone boot kits, gauge installation components, metric adapters & fittings, FASS, Quadzilla, Edge,AirDog, DTT Trans, ISSPRO, HTT Turbo, AFE, Veg pum
or from here:
MMI Marine - TRIDENT RUBBER,INC - 365-0565 TRIDENT "BARRIER LINED" TYPE A1-15 MARINE FUEL LINE HOSE, 5/16 X25 (REEL BOX)
#4
OEM supply is 3/8" and return is 5/16". Dont use regular fuel line for a gas jobbie. diesel rated fuel line is the best. You can get it from:
Vulcan compound turbo components, AirDog Systems, FireBall injectors, DrawStraw? Big Line Kits, VP silicone boot kits, gauge installation components, metric adapters & fittings, FASS, Quadzilla, Edge,AirDog, DTT Trans, ISSPRO, HTT Turbo, AFE, Veg pum
or from here:
MMI Marine - TRIDENT RUBBER,INC - 365-0565 TRIDENT "BARRIER LINED" TYPE A1-15 MARINE FUEL LINE HOSE, 5/16 X25 (REEL BOX)
Vulcan compound turbo components, AirDog Systems, FireBall injectors, DrawStraw? Big Line Kits, VP silicone boot kits, gauge installation components, metric adapters & fittings, FASS, Quadzilla, Edge,AirDog, DTT Trans, ISSPRO, HTT Turbo, AFE, Veg pum
or from here:
MMI Marine - TRIDENT RUBBER,INC - 365-0565 TRIDENT "BARRIER LINED" TYPE A1-15 MARINE FUEL LINE HOSE, 5/16 X25 (REEL BOX)
Thats right, I should have said this as well
#7
You may also want to replace the short pre-formed rubber elbow that goes between the lift pump and pre-filter/heater.
You can buy the Cummins part number for $25 or the Dodge part number for $8. I got lucky and found one at the local dealer.
Dodge part # 4883978-AA. Geno's has the Cummins part number.
You can buy the Cummins part number for $25 or the Dodge part number for $8. I got lucky and found one at the local dealer.
Dodge part # 4883978-AA. Geno's has the Cummins part number.
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM
Gm3500
Chevy/GMC 6.2L and 6.5L
9
05-07-2015 11:01 AM