boost elbow installation on a 1997 12v
#1
boost elbow installation on a 1997 12v
wheres it go im guessin on the canister under the turbo where the line is coming out but not sure if it goes there or on the back of the afc? or somewhere completely different.
---AutoMerged DoublePost---
btw my stock turbo isnt tapped right under the intake of the compressor side like the turbo in the edge boost elbo instructions...
---AutoMerged DoublePost---
Well i just put it in the spot right ontop of the AFC where the line goes on to the barb fitting.. hope it works ill try it out tomarrow on the way to work see if i get more than the 22 to 23psi i was seeing..
---AutoMerged DoublePost---
btw my stock turbo isnt tapped right under the intake of the compressor side like the turbo in the edge boost elbo instructions...
---AutoMerged DoublePost---
Well i just put it in the spot right ontop of the AFC where the line goes on to the barb fitting.. hope it works ill try it out tomarrow on the way to work see if i get more than the 22 to 23psi i was seeing..
Last edited by jaybuller; 07-29-2009 at 07:46 PM. Reason: Automerged Doublepost
#2
#3
#5
nope just the one line running under to the under side of the wastegate can goes up throught he middle of the vavle covers and goes directly into the now boost elbo at the afc housing area. I have no other hoses or lines coming off the turbo or the waste gate other than the oil line on top of the turbo.
#8