Valve Spring Replacement
#1
Valve Spring Replacement
my 60lb valve springs are gunna be hear tommorow and i didnt know if i can just rent your everyday valve spring compressor or if you need a speacial one. i know how to rotate the engine for tdc and all that good stuff.
i just want some tips or advice to change them out nice and smooth.
and any tips on installing the 4k kit are welcome to!
thanks
i just want some tips or advice to change them out nice and smooth.
and any tips on installing the 4k kit are welcome to!
thanks
#2
you can get the valve spring compressor from harbor freight for about $15. once you get the #1 and at TDC #6 is there also. pop the spring off to get the keepers out and the valve wont fall into the cylander becasue the pistons are at the top. rotate the crank 120* (correct me if im wrong) to get the #2 and #5 close to TDC then rotate another 120* to get the #3 and #4 at TDC its a farly easy operation to do
#3
#5
#7
The following users liked this post:
javelinamx1974 (10-26-2012)
#8
#9