any one know about 4 k gov kit?
#1
any one know about 4 k gov kit?
i have the 4k kit but dont have the valve springs. i have 2 questioned i wood like to no be for i do it. first one is with it installed 3 or 4 k part if i floor it from a stop will it shift before it red lines? second is will it mess a up a stock tranni? im goin to buy a valve body soon just not sure wat to do. a 3k or the 4k
#2
#4
#5
Adding more fuel as in bigger injectors, different fuel plate, your foot controlling the throttle with the 2 previous items installed and using stock charger will determine how hot it gets.
Go back to this post that you started.https://www.dieselbombers.com/5-9l-1...springkit.html
You will see most guys suggested to you to install 60lb valve springs if you want to install the 4k gov springs. If you want to install the 4k springs with out the insurance of the 60 lb valve springs then you are the one who will have to pay close attention to the tach. Just like with adding more fuel you can add injectors different plate but you are the one that has to pay close attention to egt's and to know to let off the skinny pedal.
Good luck on your decision.
Go back to this post that you started.https://www.dieselbombers.com/5-9l-1...springkit.html
You will see most guys suggested to you to install 60lb valve springs if you want to install the 4k gov springs. If you want to install the 4k springs with out the insurance of the 60 lb valve springs then you are the one who will have to pay close attention to the tach. Just like with adding more fuel you can add injectors different plate but you are the one that has to pay close attention to egt's and to know to let off the skinny pedal.
Good luck on your decision.
#7
IMO you have made a wise choice.
Good luck.
#8
#9