GSK spring kit question
#1
#3
I have ran both the 3k and the 4k with the stock plate ... all your gonna see is more low end fueling, with the stock plate FF my truck will throw you back on the low end but north of 3k it levels out due to the profile of the stock plate. if you plan on keeping the truck the way it is for a while I would go with the 3ks and if you want more later after you upgrade the plate the converison kit is only $15 to get 4000 rpm.
#4
#5
GSK 2 Inner Springs converts 3k gsk to a 4k gsk
here its just the baby spring that goes in the middle to make the 3k kit fuel to 4k
here its just the baby spring that goes in the middle to make the 3k kit fuel to 4k
The following users liked this post:
Dr. Evil (06-24-2009)
#6
#7
I have had good luck with putting shims in, For the people that don't want to spend the money on a GSK but I have a 4000gsk in my truck and love it. I have found that the shims at .085 will give full fuel to about 33-3600ish. Some use washers but I have shims made so I know each are the same thickness, washers I think very to much in thickness. Just thought I would share that with ya.
The following users liked this post:
Dr. Evil (06-24-2009)
Thread
Thread Starter
Forum
Replies
Last Post
slowstroke
For Sale
1
03-27-2015 05:19 PM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-01-2015 08:41 PM
carid
Diesel Bombers Sponsors
0
11-18-2014 06:49 AM