12 Valve on a budget
#11
if you can run a grinder, you can grind the fuel plate. Also, I would recommend a valvebody to go along with your TQ converter when you get it. Gauges are everyone's best friend, make sure you have them. They also help in diagnosing some problems, help with tuning, save your engine and trans. from melting down into 1 solid piece...
#12
#14
#16
The valve body is what controls your transmission. check out goerend bros. transmissions Goerend Transmission Incorporated they have great products. we just put the trans in my 12v it will be finished tonight as soon as i get the new dipstick in. where in Md are you
#18
I used to be stationed in Still Pond, not too far from you. On my truck i did the Gauges, intake, exhaust and #10 plate on my truck at first then as soon as i put the 3k gsk on it i blew the trans. i was told it was because of the shift points of the stock transmission. are you on DTR too.
#19