So, i'm looking at installing a set of 7x.014s ?

With my Pump MAXED OUT.... and the rest of my setup...

I was calculating that i could possibly be making 90psi (6.2bar?) boost and POSSIBLY make 900crank HP... but they would be HOT HP...

I'm thinking this is possible, HX60 should be able to supply for 1000WHP as a single... 92mm inducer....

My HX40 is a Super 40 16cm2 wastegated...

Any suggestions, other than a new clutch setup ?

 

studs oringed head better valve springs and pushrods more crank case ventilation are some off of the top of my head

 

^^^ what he said

 

7x.014's aren't enough for 900 crank HP. What HP level do you want to be at?

 

750whp street is what i'm shooting for

 

you will need more tires

 

I know

 

I take back what I said earlier; 7x014's actually have a cross-sectional area of .001077, comparable to a 5x.016 at .001005. But, most major injector builders still prefer 5 hole injectors over 7 hole. I think 5x.016's or 5x.018's (.001272) should suit you well.