5.9L 12V Performance Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps Related to Performance and Longevity

Just a lil help plz

Thread Tools
 
Search this Thread
 
  #1  
Old 09-20-2012, 07:48 PM
CLM64's Avatar
Newbie
Thread Starter
Join Date: Nov 2008
Location: Lenoir City TN
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Just a lil help plz

my mods are in my sig but my truck is lazy when i drive down the road and get in to it. it is like something is holding it back even with the mods my truck has been lazy but since i have got away from the sled pulling thing i want to use my set up and turn it to be a quick street truck so im asking for help on what to do
thanks Chris
 
  #2  
Old 09-20-2012, 08:39 PM
Red_Rattler's Avatar
High Tech Redneck

Join Date: Nov 2007
Location: Columbus WI
Posts: 6,730
Received 496 Likes on 397 Posts
Default

overfueled and choking it out... Rolling into it or flooring? Why so low on the timing?
 
  #3  
Old 09-20-2012, 08:42 PM
daveO's Avatar
Diesel Bomber
Join Date: May 2009
Location: Pottstown, PA
Posts: 1,030
Received 171 Likes on 90 Posts
Default

How much boost are you seeing? Fuel pressure? You might want to look into a more streetable turbo/injector combo. I would imagine that 66/14 takes a while to spool.
 
  #4  
Old 09-21-2012, 07:08 AM
CLM64's Avatar
Newbie
Thread Starter
Join Date: Nov 2008
Location: Lenoir City TN
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

i roll in to it the turbo starts to come in around 1500 but don't light till 1700 i had the timing at 21 when i was pulling but seen no big gain in anything. And i run around 40psi of fuel to the pump and i can build 60psi on the turbo when it comes in but it builds to 30 pretty quick
 
  #5  
Old 09-23-2012, 03:49 PM
CLM64's Avatar
Newbie
Thread Starter
Join Date: Nov 2008
Location: Lenoir City TN
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

found a leak before the turbo and slid the fuel plate back close to stock and seams to of helped a bit its not as laggy as it was should i move the plate back father
 
  #6  
Old 09-23-2012, 07:30 PM
daveO's Avatar
Diesel Bomber
Join Date: May 2009
Location: Pottstown, PA
Posts: 1,030
Received 171 Likes on 90 Posts
Default

You're probably in a good spot as far as the plate goes, maybe try adjusting the starwheel some and see how it feels.
 
  #7  
Old 09-24-2012, 03:35 PM
CLM64's Avatar
Newbie
Thread Starter
Join Date: Nov 2008
Location: Lenoir City TN
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

my star wheel when i set it i and start it it moves back to were is is lose its like there is nothing to keep it tight
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
itvinny
Diesel In Distress - Support Ticket
1
06-19-2015 09:26 PM
itvinny
Diesel In Distress - Support Ticket
1
06-19-2015 09:21 PM



Quick Reply: Just a lil help plz



All times are GMT -5. The time now is 07:05 PM.