Programing 5.9 cummins
#12
#16
#17
i downloaded the demo off the site, it is fairly simple that is true, but my biggest issue with it is it all works off of calc load...i dont tune off of load...i try to think of everything in a mechanical way, so i relate the efi tables to the different aspects of a mechanical pump, except for duration/pulsewidth and rail pressure since those cant be easily changed in a mechanical pump.
so lets take a look at one of the "limiters" that he's talking about that is in the "base" tune that cant be changed, unless it can in the "pro" version of the UDC
in this table you have fuel delivered based off of rpm and manifold pressure, so basicly this is your AFC if it was a mechanical pump. from what i've seen that they do to this table i would compair it to taking the AFC foot out and taking the fuel plate out.....kinda hard to "tune" a 12v when its missin those 2 parts isnt it
thats just one table but the other relative tables or "limiters" are all done the same way, just pretty much maxed out
dont get me wrong here and i didnt mean to get on a soap box, the UDC will be a great improvment for the current smarty users no doubt at all, but efi lets you decide what tables are relivant to your needs and gives the end user more options
so lets take a look at one of the "limiters" that he's talking about that is in the "base" tune that cant be changed, unless it can in the "pro" version of the UDC
in this table you have fuel delivered based off of rpm and manifold pressure, so basicly this is your AFC if it was a mechanical pump. from what i've seen that they do to this table i would compair it to taking the AFC foot out and taking the fuel plate out.....kinda hard to "tune" a 12v when its missin those 2 parts isnt it
thats just one table but the other relative tables or "limiters" are all done the same way, just pretty much maxed out
dont get me wrong here and i didnt mean to get on a soap box, the UDC will be a great improvment for the current smarty users no doubt at all, but efi lets you decide what tables are relivant to your needs and gives the end user more options
Thread
Thread Starter
Forum
Replies
Last Post
plumberjack
Diesel In Distress - Support Ticket
29
03-03-2015 11:38 PM
cumminsaddict199
5.9 Liter CR Dodge Cummins 03-07
7
12-22-2014 09:57 PM
78F250Cummins
Wanted To Buy (WTB) - Used
7
11-09-2014 01:12 AM