5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

Pickup surging

Thread Tools
 
Search this Thread
 
  #1  
Old 01-08-2011, 02:23 PM
zach_west's Avatar
Diesel Wrench
Thread Starter
Join Date: Jan 2009
Location: Canyon, Tx
Posts: 977
Received 33 Likes on 25 Posts
Default Pickup surging

Well, my 03 is surging when i give it anything more than 1/4 throttle. It started doing this after I replaced my injectors and put an airdog 150 on it. I put the drawstraw at the back of the tank(maybe a little 2 far back not really sure?) If the tank is full it doesn't do it to bad but the lower it gets the worse. 1/2 tank it does it and at 1/4 tank you can barely touch the throttle without it acting up. It seems as if It's running out of fuel which I know shouldn't be the case. Any help would be greatly appreciated.
 
  #2  
Old 01-08-2011, 02:49 PM
asylum's Avatar
Diesel Fan
Join Date: Feb 2010
Location: Western PA
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

Interesting. Am curious what the problem is.
 
  #3  
Old 01-08-2011, 03:21 PM
busta's Avatar
Diesel Bomber
Join Date: Jan 2008
Location: hampstead nc
Posts: 1,739
Received 147 Likes on 118 Posts
Default

check the draw straw to make sure you don`t have a bad one
also check the cut you put in it, then check all fittings to ensure they are not leaking
you could alsocheck out a sump for your tank
 
  #4  
Old 01-08-2011, 05:07 PM
zach_west's Avatar
Diesel Wrench
Thread Starter
Join Date: Jan 2009
Location: Canyon, Tx
Posts: 977
Received 33 Likes on 25 Posts
Default

I'll pull my tank tomorrow and check it I think I'm going to move it to the middle anyways. Also i'm only getting 14 mpg's now where before I was getting 20, and that was with injectors so bad it wouldn't start at all without ether.
 
  #5  
Old 01-09-2011, 06:11 PM
zach_west's Avatar
Diesel Wrench
Thread Starter
Join Date: Jan 2009
Location: Canyon, Tx
Posts: 977
Received 33 Likes on 25 Posts
Default

Ok I pulled the tank out and checked the draw straw, It looked ok. I had some of the 1/2 in. hose left over from splicing the fuel lines and I slid It over the draw straw to eliminate any pinhole leaks that could be there. it's a little better now but still does it at 1/8 tank now. does anybody else have any ideas because i'm getting tired of working on it starting to make me think i have my ol' 6.5 chevy back again . i was told maybe it was an injection pump which if it is does anybody know where a 12v is and the best way to go about putting that in there .
 
  #6  
Old 01-09-2011, 06:59 PM
Red_Rattler's Avatar
High Tech Redneck

Join Date: Nov 2007
Location: Columbus WI
Posts: 6,730
Received 496 Likes on 397 Posts
Default

Fuel pressure gauge is your friend and how far off the bottom of the tank is it?
 
  #7  
Old 01-18-2011, 08:20 PM
zach_west's Avatar
Diesel Wrench
Thread Starter
Join Date: Jan 2009
Location: Canyon, Tx
Posts: 977
Received 33 Likes on 25 Posts
Default

It's almost touching the bottom. maybe 1/4 inch off. It runs great at 3/4 tank or more though that's what i don't understand some people say ip but that wouldn't matter with constant flowfrom the tank.
 
  #8  
Old 03-31-2011, 06:16 PM
big-c's Avatar
Diesel Fan
Join Date: Dec 2009
Location: n,ky
Posts: 33
Likes: 0
Received 2 Likes on 2 Posts
Default

a leak in the draw straw or building vacumn in tank
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
03-27-2015 07:20 PM
Diesel Bombers
Latest Automotive Industry News
0
11-27-2014 07:10 PM
Diesel Bombers
Latest Automotive Industry News
0
11-18-2014 03:40 PM
Diesel Bombers
Latest Automotive Industry News
0
11-03-2014 12:50 PM
Diesel Bombers
Latest Automotive Industry News
0
10-29-2014 01:30 PM



Quick Reply: Pickup surging



All times are GMT -5. The time now is 08:40 AM.