Gauge Issue
#1
Gauge Issue
Something new started with the truck about a week ago and it does it when the truck is moving or parked. All of the gauges except the tach and speedo or the ones I installed... ie fuel volt oil temp stop workin for a second or less. Sometimes it's just the fuel gauge itself. It's like the cluster loses signal or power? But the tach and speedo are fine? I dunno, any input?
#2
#3
Lights are not effected when it happens. The low fuel light comes on since the gauge says E but the check gauges light doesn't come on when it says no volt or oil pressure so I dunno what's up with this damn truck. Also I noticed when I shut the truck off and then turned the lights off after to activate the headlights to stay on for a min, they shut off like normal and the trucks tail lights stayed on and would not turn off (30 mins later) until i cycled the key on and off.
Last edited by Red_Rattler; 10-28-2009 at 09:26 AM.
#5
#6
My 06 is doing the same thing but its just the tach. Sometimes it works and sometime i'm running 300 rpms lower than normal. I talk to a good friend at dodge and he said that the cluster more than likely will have to be replaced. it like $300 to $500 buck with the core charge ( meaning your old cluster) like 60 to program it to your truck and what every the labor my be to install it. It also come with a 1 year warrenty from dodge on the new cluster. Hopefully this can help you out some.
#7
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
10-23-2014 08:10 AM