I am thinkin about a new set of injectors for the ole goat, (06,5.9) wat is a good set for a stock pump? Thanks for any info.

 

I would say 50hp would be ok with the stock pump its the lift pump that cant keep up.

 

Ok thanks wat lift pump would i need.

 

Airdog or Fass

 

Alot of it depends on your pocket book. If you can afford it look into Flux 1's or 1.5's to improve fuel efficientcy and power. You can also run a Walbro pump inline with factory and have all the fuel you will need minus what the cp3 can support.
Extrude Honed is also another good choice and alot cheaper than Flux tips.

 

Seen to many people have issues with the Flux Injectors here lately.

 

j l machine with a fass pump

 

I am also thinking of upgrading my injectors (2006 quad cab 3500 4x4) since I have over 100,000 miles on the stock ones. I plan on getting the FASS pump but what injectors? I am looking for mileage with some towing and I currently have the Edge w/juice, banks ram air, no cat, and a MBRP exhaust (just muffler) What brand and size?

 

j and l machine injectors and i would stay 50 to 80 hp u can get them through industrial injection or premeire performance

 

What would stock injectors be rated at? (HP) Does industrial injection or premeire performance
Have a website I can look at?