Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   5.9 Liter CR Dodge Cummins 03-07 (https://www.dieselbombers.com/5-9-liter-cr-dodge-cummins-03-07/)
-   -   Debadging ? (https://www.dieselbombers.com/5-9-liter-cr-dodge-cummins-03-07/24812-debadging.html)

2500HeavyDuty 04-04-2009 08:26 PM


Originally Posted by JTProuhet (Post 318161)
So u don't want it to get rounded or you don't want it to get a flat spot? Sorry I'm not following ya...


keep it flat, try not to get it rounded

JTProuhet 04-05-2009 12:53 AM

Alright finally got it all off... That eraser wheel is a tool from god!!! Haha that worked awesome!! Definately worth the money if your going to do it yourself... The door moldings were a litte harder.. Got a little heat to them got one end up about 3 inches down grabbed it and just pulled it off... EXECPT for when I didn't apply heat to the the one on the drivers and just pulled it off.. Some clear coat came off...... Anyone know how to fix missing clear coat..

But anyways as far as the rest of the residue was A LOT easier getting it off with the wheel as apposed to using goo gone.. I will get pics up tomorrow!!

torqctd 04-05-2009 01:12 AM

If not all the clear coat came off, I would try buffing it out first.

JTProuhet 04-05-2009 05:50 PM

How would I know if all the clear coat came off?? Would something like that be covered under some kind of paint warranty?? Haha that would be sweet

05cumminsdrw 04-05-2009 08:43 PM

well we used this stuff called frog juice dont know were to get it but it worked like a charm glue came right off i think my brother got it from a sign shop i belive they use it for removing vinal off signs, but i will check with him and get back.

JTProuhet 04-07-2009 02:57 PM

5 Attachment(s)
Here are some pics of it all finished!!

JTProuhet 04-07-2009 02:59 PM

looks soooooooo much better...

next on the list....

smoking the 3 tail lights:U:

MegaMan 04-09-2009 03:21 PM

The stripe eraser's the right tool so here's a little more info: Best place to get one is at your local paint & body supply store. Ask for 3M brand, they do a better job & last longer. The cheaper brands will take the tape off but they leave a lot of glue & mess to clean off. The 3M turns it all into powder that you can just wipe off. As already stated, try & keep the eraser square to the panel, it lasts longer. Also, while you're there pick up a jug of SCAT. It's a wax & adhesive remover that will not harm the paint. Strip the tape off with the eraser & wipe the residue off with the SCAT. You'll never know anything was there. Recommend using plastic tools, they won't gouge the paint. Never tried fishing line, sounds like that works well.

JTProuhet 04-09-2009 08:53 PM

a heat gun and fishing line worked great:U::choochoo:

nmlakerat 04-15-2009 04:25 PM

anybody want to send me two 5's that they removed off the door ?


All times are GMT -5. The time now is 11:52 AM.


© 2024 MH Sub I, LLC dba Internet Brands