Need help with bumper
#1
#4
#6
go with a ranchhand and weld your mounts for your plow on. if you go with an all steel bumper you can always weld stuff on
---AutoMerged DoublePost---
i didnt mean to shoot down the post from the guy who posted first. if its steel go with that. i am from texas and work on a ranch so have to sport the ranchhand hahaha. but they are heavy
---AutoMerged DoublePost---
i didnt mean to shoot down the post from the guy who posted first. if its steel go with that. i am from texas and work on a ranch so have to sport the ranchhand hahaha. but they are heavy
Last edited by woodruff69; 10-16-2008 at 07:08 PM. Reason: Automerged Doublepost
#7
ranch hands would be good if they were strong throughout and didnt utilize diamond plate....... but the only strength is in the center pipe... if you catch something at an angle, then it will fold up like nothing... my products are strong from all angles.... as for welding the mounts on, that is a good idea if you have access to the correct tools
#8
---AutoMerged DoublePost---
How much further do your bumbers stick out than the stockers in the middle 2 feet?
Last edited by Rand1544; 10-17-2008 at 01:56 AM. Reason: Automerged Doublepost