So I need to replace my TPS and I planned on buying one from genos, but have come across a couple others. Want to know what you guys think...
More Information for STANDARD MOTOR PRODUCTS TH420
and then this one..
https://www.amazon.com/gp/aw/d/B019M...=I9J3MHM0K1WQE

If I don't have to replace the whole bracket the one on Amazon would obviously be my first choice. Has anyone replaced just their TPS sensor without the bracket?

 

Anyone have any input?

 

All the same cheapest one or factory your choice!

 

Really? All the same? Anyone beg to differer? It doesn't seem like there's much to it. I couldn't see there being too big of difference in quality with something like this. But I've read that some are good and some aren't.

 

Still kinda new and haven't had my 24v long but I come from 12v's. If TPS is the Throttle Position Sensor then for the most part they should be the same cheap or factory.. And not much to them. I bypassed my old one with a Potentiometer which you could adjust manually for when it shifted into overdrive on my 91's non interlocking transmission. I say buy the cheapest or google if you can put a Pot meter on it instead. Hope this helped.

 

Found a cheap one for my 12 v 91 . Shifts great now.
http://www.ebay.com/itm/Throttle-Position-Sensor-New-Ram-Truck-Dodge-W250-D250-D350-W350-1989-1993/351705939021?_trksid=p3693.c100102.m2452&_trkparms=ao%3D1%26asc%3D20140212121249%26meid%3D1a82c114467c4b8ab72dae504011571c%26pid%3D100102%26