Hey guys needing to pick yalls brains for a min. I just put 75 HP injectors in my truck and am now getting high egts. I'm pretty sure the stock turbo can't handle it haha but I was needing to know what turbo would y'all go with without putting head studs in at the moment. Also what kind of setup would be best for the truck. Thanks in advance.

 

You need a programmer like a Smarty! 75 are not that big your turbo will handle them. But a 62 would be nice! What is high for you? 1200? 1600? maxed out??

 

I can hit 1300 with plenty of throttle left haha. Would the stock head bolts handle a 62 or would I have to go to studs?

---AutoMerged DoublePost---

Just drove the truck again the temps are about 600 at 55 and from 55 mph to about 85 it climbs to about 1300 degrees and with a trailer it climbs even faster

 

I ran what's in my signature without head studs for 3 years and never had any head issues... A 62 won't hurt you at all.. you could go with a 64 or 66 and wastegate it around 45psi that way you only have to buy parts once and not upgrade down the road.

 

ttt