Wondering if anyone has an adjustable track bar on their truck. I have a 2.5" leveling kit, and my stock track bar is starting to pop when I turn. I was lookin at the adjustable track bar from NAPA -but wanted some opinions first. Thanks in advance.

 

i got the 03 -07 adjustuble trac bar with conversion bracket for my 01 last trac bar you'll ever have to get and i love it. you'll only have to replace the bushings at each end if they go bad

 

What brand is the NAPA one? Or do you have a link so we can see it?

 

I've been thinking about an adjustable as well. I too would like to hear about them.

 

Here is the NAPA link: NAPA AUTO PARTS

I chose not to go w/ the track bar NAPA offers. I would rather put stress on a joint laterally than at an angle -referring to the way it adjusts. I ordered one today from Gino's, like the one lunk mentioned above.

 

spend the money once and get the kit from source automotive that converts it to the third gen style

 

+1 for the 3rd gen.

Done and never thought about it again...

 

Wow you learn something new everyday. I never knew NAPA had one... If your lookin for a cheap way out that will work fine. But if your looking at gettin something good then spend some coin and get one that has the heim joint on the frame side, OR the the one that converts it to the 3rd gen style with a bushing on both sides!