alright heres the deal i have a fass fuel pump. the HPFP series with no filter. and i know the stock one just isnt doing the job. is there anywhere i can get a good inline filter? or one to just take the place of the stock filter? and if i put an inline filter on it should i just bypass the stock one? or does anyone know if fass makes an attachment to put a separation system right on the pump? (that would be great too)

 

These are a filter only kit:
XX-Fuel Diesel Fuel Filtration Systems

 

thanks alot. i will check it out.

---AutoMerged DoublePost---

if i put a new filter kit on my truck should i just bypass the stock one?

 

You could get a baldwin FB1311 filter head, a male NPT (whatever size the Fass HPFP is, I think 3/8th or 1/2") to male -10 ORB and put that right on the fass pump or inline on a simple mount.

This is what I did when I had my HPFP on my 04.5...

Cat fuel filter set up - Dodge Cummins Diesel Forum

 

I didn't when I installed my FASS for two reasons. 1, extra filtration. 2, keep the fuel heater. I still have lots of flow to my VP44 with the stock filter, and stock lines between the filter and injection pump.