Fuel Guage 01 cummins
#12
I lifted my bed vs dropping the tank, there are 6 bolts, a ground wire behind the cab, your filler neck connection and then you tail light connections. I have an overhead winch so it only took 2 of us to get it done in under an hour (also had some winch difficulties, damn previous home owner) the bed is not that heavy but, 3-4 guys would make it very simple if you do not have a lifting device. Hell you could even make stands for the corners and drive out from under it for that matter. Either way, a few extra sets of hands wouldnt hurt.
Do you have an aftermarket Fuel system? This would be a good/convenient time to make the fuel line connections for it at the same time and not have to touch this part of your fuel system again.
Do you have an aftermarket Fuel system? This would be a good/convenient time to make the fuel line connections for it at the same time and not have to touch this part of your fuel system again.
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM
Collin Dow
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
02-21-2015 08:18 PM