overboost
#11
#12
#14
#15
ow guys ow...
---AutoMerged DoublePost---
just put the stock elbow back on there. lets us know if you get less or more boost. we will continue this then.
hahahaha i think ive pictured the elbow you have so veagly discribed. one side of the elbow is big like normal and the wastegate side is very small??? is this correct? if so than on that particular elbow by all means drill it out one size at a time. that will make it open faster. it will equalize faster with more similar sized holes. the elbows i mess with have an actual 3rd hole venting to the atmosphere making that hole bigger will have the adverse effect, discribed above. ahhhhhhh -goooose fraaabaaaaaa- i hope that is what you guys were getting at so you all can quit bashing and start helping this guy learn.
---AutoMerged DoublePost---
just put the stock elbow back on there. lets us know if you get less or more boost. we will continue this then.
hahahaha i think ive pictured the elbow you have so veagly discribed. one side of the elbow is big like normal and the wastegate side is very small??? is this correct? if so than on that particular elbow by all means drill it out one size at a time. that will make it open faster. it will equalize faster with more similar sized holes. the elbows i mess with have an actual 3rd hole venting to the atmosphere making that hole bigger will have the adverse effect, discribed above. ahhhhhhh -goooose fraaabaaaaaa- i hope that is what you guys were getting at so you all can quit bashing and start helping this guy learn.
Last edited by turbo2332; 10-13-2011 at 06:22 PM. Reason: Automerged Doublepost
#18
put together a sweet little hx35/40 hybrid. did mine with parts from ebay and BAE for a little over $300, she spools up a lot quicker than my stock hx35. and like you, I back out of her at about 35 psi, not knowing quite what my head bolts will really contain. Also, I don't even have a wastegate anymore, and it doesn't seem to be an issue.
Thread
Thread Starter
Forum
Replies
Last Post