i need help finding a yoke for my truck. some one told me that thy are very rare and $$$$$ its a 3.55, 29 spline. there is only two U-Joints on the drive shaft and they are the bigger U-Joints, HD is what i was told. im think it is a dana 70 and from what i understand a dana 60 yoke will work, but they are two dif yokes and the U-Joints are two dif sizes.......will some one plz help????
__________________
2002 Dodge Ran 2500 EX-Cab 4X4 Sport Auto 5.9L cummins w/ HX35 from a manual, edge comp,
6in lift, 35in tires, gages on piller and steering colum, stock dana 60 front dana 70 rear.

 

you got a junk yard in yer area...........I would check withthem first..................pennies on the dollar

 

i have called every junk yard i could find in a 50-100 mile radies.........one person had it for $180+

 

http://shakerbuilt.com/Products.html

or

http://www.highangledriveline.com/yokes.html

about 90 bucks new...

 

thanks for the help.........ill call them today........the main prob that i was having is that my truck has a HD drive shaft with the big U-Joints......any more info on the yoke????

 

when you say 29 spline are you refering to the axle spline or the pinion spline?????

 

axle spline

 

you sure thats axle splines, cause all my dana 70 stuff is telling me 29 spline is the pinion splines....

 

http://www.pirate4x4.com/tech/billav...oke/index.html

measure your u-joint and use the chart here...

 

it was a 1410 pinion yoke. i got it from http://www.highangledriveline.com/yokes.html for 105.00 with tax......thanks