24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

Transmission? Electrical?

Thread Tools
 
Search this Thread
 
Old Jun 21, 2011 | 12:18 AM
  #11  
Russ Roth's Avatar
Diesel Enthusiast
Joined: Jul 2009
Posts: 133
Likes: 11
From: Vancouver, WA
Default

Originally Posted by turbo20psi
With the stock VB the TQ will not lock up until 4th gear (OD).
I'm not sure about '00 but '01 and '02 lock in third.
 
Reply
Old Jun 21, 2011 | 12:34 AM
  #12  
Nutty Jeeps's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2011
Posts: 259
Likes: 4
From: Wisconsin
Default

sorry forgot this, didn't think it mattered..... Truck has an 01 motor and trans in it not the 99

---AutoMerged DoublePost---

didn't know i could have a code with no check engine light

Code is P0501
 

Last edited by Nutty Jeeps; Jun 21, 2011 at 12:34 AM. Reason: Automerged Doublepost
Reply
Old Jun 21, 2011 | 04:24 AM
  #13  
banditsdiesel's Avatar
Diesel Enthusiast
Joined: Dec 2010
Posts: 271
Likes: 17
From: chatsvegas, georgia
Default

the 99 will also lock in third with the od off or with a lock up controller. it might be worth the money to take it to a trans shop and have them diagnose it to see what it is then fix it. it would be a lot cheaper than guessing on it and throwing parts at it.
 
Reply
Old Jun 21, 2011 | 10:40 AM
  #14  
Nutty Jeeps's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2011
Posts: 259
Likes: 4
From: Wisconsin
Default

I have a wire that isn't plugged in anywhere that came lose from somewhere.... but i can't see where it matches up to or plugs in.... How do you post a picture on here?
 
Reply
Old Jun 21, 2011 | 10:41 AM
  #15  
Nutty Jeeps's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2011
Posts: 259
Likes: 4
From: Wisconsin
Default

here it is....... its the black wire but i cant see where it goes to or anyother wire that matches up with it
 
Attached Thumbnails Transmission? Electrical?-imag0102.jpg  
Reply
Old Jun 21, 2011 | 12:26 PM
  #16  
Nutty Jeeps's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2011
Posts: 259
Likes: 4
From: Wisconsin
Default

this probably has to do with something when the motor and trans were swapped out....did dodge change the color wires from those years?

---AutoMerged DoublePost---

Its Fixed!!!!!!!!
 

Last edited by Nutty Jeeps; Jun 21, 2011 at 12:26 PM. Reason: Automerged Doublepost
Reply
Old Jun 21, 2011 | 08:49 PM
  #17  
Red_Rattler's Avatar
High Tech Redneck

Joined: Nov 2007
Posts: 6,730
Likes: 496
From: Columbus WI
Default

oh my... please fix those wire splices correctly while your at it....
 
Reply
Old Jun 21, 2011 | 08:50 PM
  #18  
Nutty Jeeps's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jan 2011
Posts: 259
Likes: 4
From: Wisconsin
Default

dont worry jake i did a decent soldering job with some shrink over it
 
Reply
Old Jun 21, 2011 | 09:20 PM
  #19  
turbo20psi's Avatar
Diesel Bomber
iTrader: (1)
Joined: Mar 2009
Posts: 3,228
Likes: 180
From: MD,NC
Default

Was that wire part of the lock up to the converter?


---AutoMerged DoublePost---

Originally Posted by Russ Roth
I'm not sure about '00 but '01 and '02 lock in third.
Well I stand corrected. Its been so long mine locks up in second now.
 

Last edited by turbo20psi; Jun 21, 2011 at 09:20 PM. Reason: Automerged Doublepost
Reply
Old Jun 21, 2011 | 11:14 PM
  #20  
Russ Roth's Avatar
Diesel Enthusiast
Joined: Jul 2009
Posts: 133
Likes: 11
From: Vancouver, WA
Default

Originally Posted by turbo20psi
Was that wire part of the lock up to the converter?


---AutoMerged DoublePost---



Well I stand corrected. Its been so long mine locks up in second now.
Is that an aftermarket VB? I thought stock did not lock in second? Just curious it's been a long time since I had a stock one.
 
Reply



All times are GMT -5. The time now is 11:58 AM.