Just picked up a 98 2500 24V with 5spd............need a replacement lower cover for the drivers seat.....can you still get it from the dealer ? any aftermarket supplier ??

 

Does it just have the usual tear on the outside top? An upholstery shop could sew it up, I was able to get it done to mine.

 

Has anybody tryed swapping the passanger bottom set? I dont see why it wont work.

 

I think they would be different. The inside would be straight cut, and the outside would has a different pattern for the seat tilt.

 

I wouldnt mind knowing the same thing, my seat leather is good BUT my foam inside is smashed on the left of the drivers side from prior owner sliding outta truck.

 

The foam could use a replacement......but I would settle for new cloth seat bottom.....

 

I switched my 1995 Ram 2500,The floor brackets stay where they were, unbolt the seatbottom off the frame,most of the bolts will match, One corner I used a small c clamp to keep it together.The seat belts didnot have to be changed. My passenger side was and still is like new,the bottom foam on the driver side was soft so I replaced with a bottom foam from a passenger bottom from a junk yard. It was worth the extra effort to use my whole passenger seat,the back was nice&firm,I had the cloth fixed on the driver seat& the better bottom foam,put it on the passenger side and is comfortable as well. Most of the time it has my son's car seat in it anyway. Hope this helps,JOHN

 

i switched mine 4 10mm bolts and the seat cushion comes off the seat hard wear stays there lines ups with no problem but now my seat feels brand new would like to know if there is replacement foams out there some where though

 

i swapped out the passenger bottom with my drivers side bottom and they are the same