24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

"no Bus" code

Thread Tools
 
Search this Thread
 
Old Dec 16, 2010 | 09:12 PM
  #1  
chaney2051's Avatar
Thread Starter
|
Diesel Fan
Joined: Dec 2010
Posts: 32
Likes: 2
From: West Virginia
Default "no Bus" code

I just recently put on an edge box on my 99 cummins. Ran great for a few days. Well today I ran into the store and came right back out and went to start it up and my airdog wouldnt kick on, and it said "No Bus" on the odometer... any ideas to help me start looking??
 
Reply
Old Dec 16, 2010 | 09:14 PM
  #2  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

What kind of Edge? Comp/Juice/EZ? Try disconnecting the 3 wire weatherpack connector under the hood that the Edge plugs into. That is a CAN Bus connector.
 
Reply
Old Dec 16, 2010 | 09:16 PM
  #3  
chaney2051's Avatar
Thread Starter
|
Diesel Fan
Joined: Dec 2010
Posts: 32
Likes: 2
From: West Virginia
Default

It is a juice.
 
Reply
Old Dec 16, 2010 | 09:19 PM
  #4  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

OK, I still think you should try unplugging the Juice 3 wire connector under the hood for the CAN Bus.
 
Reply
Old Dec 16, 2010 | 09:19 PM
  #5  
chaney2051's Avatar
Thread Starter
|
Diesel Fan
Joined: Dec 2010
Posts: 32
Likes: 2
From: West Virginia
Default

are you talking about the harness for the edge? or something else?
 
Reply
Old Dec 16, 2010 | 09:20 PM
  #6  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

The Edge harness. 3 pin connector all in a row. Connector is behind the fuel filter.
 
Reply
Old Dec 16, 2010 | 09:25 PM
  #7  
chaney2051's Avatar
Thread Starter
|
Diesel Fan
Joined: Dec 2010
Posts: 32
Likes: 2
From: West Virginia
Default

will that mean my edge box is bad?
 
Reply
Old Dec 16, 2010 | 09:27 PM
  #8  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

There is that possibility. Unplugging it will determine if it is the Edge, or in your truck.
 
Reply
Old Dec 16, 2010 | 09:32 PM
  #9  
chaney2051's Avatar
Thread Starter
|
Diesel Fan
Joined: Dec 2010
Posts: 32
Likes: 2
From: West Virginia
Default

earlier today I unplugged it and my pump would work. But then just a little while ago I unplugged it and pump still didnt work..
 
Reply
Old Dec 16, 2010 | 09:35 PM
  #10  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

When won't the pump run? Just with the key on? It will only run for a second when the key is turned on, then won't run again until you crank. If you bump the starter but not start the engine, it will run for about 20 seconds.
 
Reply



All times are GMT -5. The time now is 11:24 PM.