yeah i cleared it and will check when i get home tommarow

 

I dont know what that means, that is what alldata gives. It gives directions to check it hooked up to the scanner at Dodge, might be part of that.

 

I had the same code when the smarty was programmed...it would say something like "ECM Fueling Calibration Error - normal w/ aftermarket programming"

dont quote me exactly but its only when the smarty was on

 

Update...anything happening with this?

 

nope the pick up runs just fine i havent check to see if its back but if it runs fine leave it alone unless it needs to go faster. anyway i check with some onther dudes and they said that it was a voltage jump or somthing like that and if i drain the juice from the ecm and it should go away so problem fixed for now

 

Oh yeah, no need to replace parts if you dont have to. Could be "just one of those things"

 

I've gotten some error codes from playing in the snow. It would throw the MIL light and all... Well after checking the codes it was aa bunch of thing like the one above and few other dealing with the VP44 and ECM...

Reset the error codes and they never came back... So more that likely water/snow got somewhere it shouldn't of...

But the point of this story is check you wiring over most owner don't keep the engine area very clean if the wiring get oil soaked it might do the same thing too.

As for my truck the engine gets wash every weekend with body of the truck... And it still looks new under the hood!

 

yupp my transmission just went out and it is flashing this code.. it made a pop clang and popped again..then revved to 3000. any input on what to do now would be nice as my truck is on the side of the road.

 

buy a new tranny!

 

[QUOTE=COON SMILE;66393]I had the same code when the smarty was programmed...it would say something like "ECM Fueling Calibration Error - normal w/ aftermarket programming"

dont quote me exactly but its only when the smarty was on[/QUOT




i get the same code with my smarty on and its something to do with the samrty fueling and its not a problem!!!! it says normal with after market programming and mine it wouldnt throw a CEL it just stored it, my truck runs fine and its one the smarty codes everytime i check it, its never one with stock mode!