24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

wipers

Thread Tools
 
Search this Thread
 
  #1  
Old 03-20-2010, 06:44 PM
dodge rodder's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2009
Location: Ada, OK
Posts: 542
Received 15 Likes on 15 Posts
Default wipers

has any one had any trouble with the wind shield wipers not returning back down and on delay going one speed and coming on and off through the stroke.work fine on full on hi-low
 
  #2  
Old 03-20-2010, 06:49 PM
DieselWeasel's Avatar
"Ohio Bombers" Director
Join Date: Apr 2009
Location: Painesville, Ohio
Posts: 812
Received 37 Likes on 31 Posts
Default

Yes, my truck does that... I think the fact that they stop 1/4" from all the way down is either the stop switch or the turn signal stalk. My guess for mine, and yours probably too is that the stalk is jacked up. My intermittent works not so intermittenly intermittenly! HAHA!
I was going to try that before digging into the motor for a stop switch.
 
  #3  
Old 03-20-2010, 07:24 PM
wvsmoker's Avatar
Diesel Fan
Join Date: Feb 2009
Location: west by god virginia
Posts: 88
Received 3 Likes on 3 Posts
Default

mine did the same thing before i changed the wiper motor and its good to go
 
  #4  
Old 03-20-2010, 08:13 PM
juiced_98andahalf's Avatar
Diesel Fan
Join Date: Feb 2010
Location: Enid/Broken Arrow,OK
Posts: 22
Likes: 0
Received 2 Likes on 2 Posts
Default

mine would stay on for like 5 minutes after i shut them off!
 
  #5  
Old 03-20-2010, 09:10 PM
dodge rodder's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2009
Location: Ada, OK
Posts: 542
Received 15 Likes on 15 Posts
Default

the stop in the wiper motor is what i was thinking but just woundering if any oine has had this problem and how to fix it thanks for the info guys
 
  #6  
Old 03-20-2010, 10:24 PM
wvsmoker's Avatar
Diesel Fan
Join Date: Feb 2009
Location: west by god virginia
Posts: 88
Received 3 Likes on 3 Posts
Default

i just replaced the whole wiper motor i got tired of pissing with it... the easiest way haha
 
The following users liked this post:
blue24valvecummins (01-30-2011)
  #7  
Old 03-20-2010, 11:10 PM
dodge rodder's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2009
Location: Ada, OK
Posts: 542
Received 15 Likes on 15 Posts
Default

thats my way of thanking fix it and be done with it
 
  #8  
Old 03-22-2010, 06:38 PM
wvsmoker's Avatar
Diesel Fan
Join Date: Feb 2009
Location: west by god virginia
Posts: 88
Received 3 Likes on 3 Posts
Default

yeah it just ends up bein easier in the long run
 
  #9  
Old 03-23-2010, 10:09 PM
dodge rodder's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2009
Location: Ada, OK
Posts: 542
Received 15 Likes on 15 Posts
Default

thanks for all the info guys, much appreciated
 
  #10  
Old 12-26-2010, 11:24 AM
blue24valvecummins's Avatar
Diesel Fan
Join Date: Nov 2009
Location: North Dakota
Posts: 68
Received 4 Likes on 4 Posts
Default

how much of a job is it to replace the wiper motor?
 


Quick Reply: wipers



All times are GMT -5. The time now is 02:13 AM.