24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

power

Thread Tools
 
Search this Thread
 
  #1  
Old 02-27-2010, 08:01 PM
dodge rodder's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2009
Location: Ada, OK
Posts: 542
Received 15 Likes on 15 Posts
Default power

i know im a pain in the a$$ but can yall figure my hp i know it was about 325hp but i have put in 40 hp injectors and raptor pump and Quad. Adr. it all in my sig
 
  #2  
Old 02-27-2010, 08:42 PM
01quadcab's Avatar
Diesel Bomber
Join Date: Jun 2007
Location: Shingletown ca
Posts: 2,664
Received 153 Likes on 136 Posts
Default

I made 354 with juice with attitude and rv275's. with just the juice I made 319. Where did you get the 325 number from and how was that tested?
 
  #3  
Old 02-28-2010, 12:52 AM
dodge rodder's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2009
Location: Ada, OK
Posts: 542
Received 15 Likes on 15 Posts
Default

well i made a mistake sorry, got in a hurry, i already had the rv275 & zxt+, boost fooler, more boost. i was just asking around on here a while back and thats what we came up with on the set up that i had at the time. 310-325. just a gess, i know , i have no dyno for 80 miles in any direction, but i know you cant go by the rated power on the module. im still learning the performance side of the diesel world. just was wondering an HP
 
  #4  
Old 02-28-2010, 10:50 AM
01quadcab's Avatar
Diesel Bomber
Join Date: Jun 2007
Location: Shingletown ca
Posts: 2,664
Received 153 Likes on 136 Posts
Default

Mine has been on the rollers with each mod done to the truck. I would say now you should be in the 350-365 range. Now to get that thing to hook you need a set of slicks and some adjustable shocks for the back to get it to hold better. You can shim the rear about 3 degrees I have heard that really helps the hook up.
 
  #5  
Old 02-28-2010, 12:36 PM
dodge rodder's Avatar
Diesel Wrench
Thread Starter
Join Date: May 2009
Location: Ada, OK
Posts: 542
Received 15 Likes on 15 Posts
Default

thanks, mainly just wondering. but it will go down the track just to see what i can get, thank you sir
 
  #6  
Old 02-28-2010, 12:43 PM
RAW's Avatar
RAW
RAW is offline
Administrator

iTrader: (1)
Join Date: Aug 2009
Location: Alberta
Posts: 6,218
Received 684 Likes on 549 Posts
Default

Have you clocked you 1/4 mile and know your weight? Try this if you have:
https://www.dieselbombers.com/calculators.php

It's only an estimate, but could be close. Makes mine about 280-300HP at the rear wheels, weighing 8000lbs.
 
  #7  
Old 02-28-2010, 10:25 PM
01quadcab's Avatar
Diesel Bomber
Join Date: Jun 2007
Location: Shingletown ca
Posts: 2,664
Received 153 Likes on 136 Posts
Default

Originally Posted by RAWilliams
Have you clocked you 1/4 mile and know your weight? Try this if you have:
https://www.dieselbombers.com/calculators.php

It's only an estimate, but could be close. Makes mine about 280-300HP at the rear wheels, weighing 8000lbs.
how does yours weigh so much?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
1
05-10-2015 10:57 PM
explorer197143
1st Generation Dodge Cummins 89-93
0
12-28-2014 01:14 PM



Quick Reply: power



All times are GMT -5. The time now is 10:33 PM.