24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

Cooling system

Thread Tools
 
Search this Thread
 
  #1  
Old 10-20-2009, 07:00 PM
Captn_tyler's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Jun 2009
Location: Lomita, CA
Posts: 372
Received 17 Likes on 15 Posts
Default Cooling system

I changed my t-stat today, and flushed the cooling system. now my temp is boucning around alot from 188 to 210. Does the new t-stat need time to loosen up?

This is all under normal condtions, no hills, no towing. Just city and highway.

What ya think?
 
  #2  
Old 10-20-2009, 07:17 PM
wildbill's Avatar
BOMBARDIER

Join Date: Jul 2007
Location: Billlings, MT
Posts: 12,808
Received 667 Likes on 553 Posts
Default

Need another t-stat. Be sure that you get one from Cummins or don't pay less than $30 for one from a parts store.
 
  #3  
Old 10-20-2009, 07:20 PM
turbo20psi's Avatar
Diesel Bomber
iTrader: (1)
Join Date: Mar 2009
Location: MD,NC
Posts: 3,228
Received 180 Likes on 149 Posts
Default

Stick with a cummins, mine did the same thing with a t-stat brand name.
 
  #4  
Old 10-20-2009, 07:31 PM
Captn_tyler's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Jun 2009
Location: Lomita, CA
Posts: 372
Received 17 Likes on 15 Posts
Default

AH &%#$ is all i wanna say at this time. Thanks guys

---AutoMerged DoublePost---

anyone got the part number, or what is the engine I would tell them its for?
 

Last edited by Captn_tyler; 10-20-2009 at 07:31 PM. Reason: Automerged Doublepost
  #5  
Old 10-20-2009, 08:10 PM
turbo20psi's Avatar
Diesel Bomber
iTrader: (1)
Join Date: Mar 2009
Location: MD,NC
Posts: 3,228
Received 180 Likes on 149 Posts
Default

There is a name plate on the gear housing,drivers side when you go to cummins they will want a number off that plate( i removed mine) give them that and your set.DONT go to the dodge dealer they want 80.00 or so for one.
 
  #6  
Old 10-20-2009, 08:24 PM
Captn_tyler's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Jun 2009
Location: Lomita, CA
Posts: 372
Received 17 Likes on 15 Posts
Default

Yeah roger that, I got a place by me called harbor diesel. They got parts for cats, detriots and cummins. I hope this motor is used enough in commerially that they will have it. but still &^#$
 
  #7  
Old 10-21-2009, 12:11 PM
cummins24's Avatar
Diesel Enthusiast
Join Date: Feb 2008
Location: Ponder, Texas
Posts: 400
Received 10 Likes on 10 Posts
Default

You might also check the radiator cap
 
  #8  
Old 10-27-2009, 11:51 AM
AndyMan's Avatar
Diesel Enthusiast
Join Date: Mar 2007
Posts: 371
Received 45 Likes on 33 Posts
Default

Kinda glad this topic came up... My 99 just started this yesterday... TOTALLY out of the blue.... I haven't checked the coolant level, but figured the problem was either that or the WP... good call on the cap. I'll check that too.

Fingers crossed it's not a cracked block... she's a Fiddy3.
 
  #9  
Old 10-27-2009, 02:29 PM
Mopar1973Man's Avatar
Diesel Wrench
Join Date: Mar 2007
Location: New Meadows, Idaho
Posts: 820
Received 132 Likes on 94 Posts
Default

No there is nothing wrong you got a air bubble trapped in the system you'll have to burp the cooling system and reload it more. This occurs everytime I flush my cooling system it will burp a air bubble into the radiator and take in another 1 gallon of coolant.
 
  #10  
Old 10-27-2009, 10:13 PM
Captn_tyler's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Jun 2009
Location: Lomita, CA
Posts: 372
Received 17 Likes on 15 Posts
Default

So been about a week and the dang thing still bouncing aroung alot. Never goes over 220. The coolent level has not changed a bit. Anyway to bleed the cooling system?
 


Quick Reply: Cooling system



All times are GMT -5. The time now is 01:55 AM.