fuel injector removal
#2
A 10MM Socket 8MM Socket and a ratchet, Use a valve cover bolt to remove the injector (threads in the top of the injector).
Also when you pull the valve cover, Push the heater hoses down and slide the cover out towards the turbo. That way you'll avoid all the junk from the firewall insulation getting under the valve cover!
Also when you pull the valve cover, Push the heater hoses down and slide the cover out towards the turbo. That way you'll avoid all the junk from the firewall insulation getting under the valve cover!
Thread
Thread Starter
Forum
Replies
Last Post
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM