bleeding injectors
#12
#14
i did the apps adjustment like a week ago it was a .3 something and it is suposed to be a .555 no its at .52. how can i fix the 1689 i heard it could be a bad or lose connection but where do i start. what is the 1698? and how much fuel is supposed to come out during the bleeding, i have only done the 1st 3rd and 4th should i do more?
#15
The pump may not be producing enough volume, Check all connections at the VP44.
I bleed all my lines except for 2 thats behind the intake horn. Turn it over may take upto 5-10 minutes of cranking time in some cases. Always try and start for 30-45 seconds and let the starter cool atleast 5 minutes. Tighten the lines and try again. Clear all codes before trying to start!
I've got a tester I rent out to make sure the VP-44 is the problem and not the ECM, let me know if you need it!
The number of codes would lead me to think failed ECM or PCM but not always the case!
I bleed all my lines except for 2 thats behind the intake horn. Turn it over may take upto 5-10 minutes of cranking time in some cases. Always try and start for 30-45 seconds and let the starter cool atleast 5 minutes. Tighten the lines and try again. Clear all codes before trying to start!
I've got a tester I rent out to make sure the VP-44 is the problem and not the ECM, let me know if you need it!
The number of codes would lead me to think failed ECM or PCM but not always the case!