24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

power door lock relay location?

Thread Tools
 
Search this Thread
 
  #1  
Old 04-11-2009, 05:49 PM
AF1CUMMINS's Avatar
Diesel Bomber
Thread Starter
Join Date: May 2008
Location: Sumter, SC
Posts: 1,034
Received 54 Likes on 37 Posts
Default power door lock relay location?

OK, my power locks aren't working and I bought the relay at Advance Auto. I can hear it clickin in the dash but can't find it to save my life. I looked in both fuse boxes cuz I knew there were some relays there but no dice. It's looking and sounding like half my damn dash is gonna have to come out just to change this thing. BUT i can't find it, soooooo ANY help would be REALLY appreciated. Pics would be even better. Thanx guys.

---AutoMerged DoublePost---

nobody has a clue?
 

Last edited by AF1CUMMINS; 04-11-2009 at 05:49 PM. Reason: Automerged Doublepost
  #2  
Old 07-02-2009, 03:37 PM
AF1CUMMINS's Avatar
Diesel Bomber
Thread Starter
Join Date: May 2008
Location: Sumter, SC
Posts: 1,034
Received 54 Likes on 37 Posts
Default

bump
 
  #3  
Old 07-02-2009, 04:43 PM
DieselWeasel's Avatar
"Ohio Bombers" Director
Join Date: Apr 2009
Location: Painesville, Ohio
Posts: 812
Received 37 Likes on 31 Posts
Default

There is no relay... Switches go directly to the "Central Timer Modual"

It is located...
"Under the driver side end of the instrument panel inboard of the instrument panel steering column opening. where it is secured with two screws to a stamped steel bracket that is integral to the instrument panel armature"

I can provide diagrams and pics if you like...
I assume this is for your 2001 2500 4x4?
is it VIN 6 or VIN 7??
 
The following users liked this post:
AF1CUMMINS (07-02-2009)
  #4  
Old 07-02-2009, 07:36 PM
AF1CUMMINS's Avatar
Diesel Bomber
Thread Starter
Join Date: May 2008
Location: Sumter, SC
Posts: 1,034
Received 54 Likes on 37 Posts
Default

3B7KF are the first few. I'm not sure what you mean by VIN 6 or VIN 7. But yes, it's the truck in my sig. Those pics would be greatly appreciated.
 
  #5  
Old 07-02-2009, 08:15 PM
stkdram55's Avatar
BOMBARDIER
Join Date: May 2008
Location: New Holland Ohio
Posts: 6,548
Received 279 Likes on 256 Posts
Default

dont quote me on this but if the relay is clicking then chances are good the relay is fine and not stuck...and since the relay is clicking that means the switch is working to send power to the relay so i would be looking at the motor or whatever operates the locks...and im assuming you did check the fuses right
 
  #6  
Old 07-02-2009, 08:19 PM
DieselWeasel's Avatar
"Ohio Bombers" Director
Join Date: Apr 2009
Location: Painesville, Ohio
Posts: 812
Received 37 Likes on 31 Posts
Default

The vin is for the 8th number... Tells if you have the HO 5.9 or not.

Here are the dwgs.
 
Attached Thumbnails power door lock relay location?-doorlocks.jpg  
  #7  
Old 07-02-2009, 08:21 PM
DieselWeasel's Avatar
"Ohio Bombers" Director
Join Date: Apr 2009
Location: Painesville, Ohio
Posts: 812
Received 37 Likes on 31 Posts
Default

Originally Posted by stkdram55
dont quote me on this but if the relay is clicking then chances are good the relay is fine and not stuck...and since the relay is clicking that means the switch is working to send power to the relay so i would be looking at the motor or whatever operates the locks...and im assuming you did check the fuses right
Again there is no relay that is accesable... All that is in the control module.

Id agree of coarse thought that you have a bad ground, bad connection, bad motor, bad module or similar.
 
  #8  
Old 07-02-2009, 08:25 PM
stkdram55's Avatar
BOMBARDIER
Join Date: May 2008
Location: New Holland Ohio
Posts: 6,548
Received 279 Likes on 256 Posts
Default

just throwing my 2 cents in...just a disclaimer i failed my first try at my electrical ASE
 
The following users liked this post:
DieselWeasel (07-02-2009)
  #9  
Old 07-02-2009, 09:06 PM
DieselWeasel's Avatar
"Ohio Bombers" Director
Join Date: Apr 2009
Location: Painesville, Ohio
Posts: 812
Received 37 Likes on 31 Posts
Default

Originally Posted by stkdram55
just throwing my 2 cents in...just a disclaimer i failed my first try at my electrical ASE
Hey at least someone is trying to help people.. LOL!

I cheat tho.. I have ALLDATA !
 
  #10  
Old 11-05-2014, 07:58 AM
fcuica73's Avatar
Newbie
Join Date: Nov 2014
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Where at is this thing located??
I guess mine can be messed up, my truck is a 2006 Dodge Ram 5.9 and my power locks are not working, not with speed, remote or door control, could you please tell me where to find this part? My fuses are fine, thanks!
Originally Posted by DieselWeasel
The vin is for the 8th number... Tells if you have the HO 5.9 or not.

Here are the dwgs.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
1
05-10-2015 10:57 PM
Texasthb
Ford 83-94 6.9 and 7.3L General
1
03-04-2015 08:20 AM



Quick Reply: power door lock relay location?



All times are GMT -5. The time now is 11:55 PM.