need a new apps i believe.
#21
how does that work? i dont have a problem like this but im curious as to what this apps thing does.
#22
Diesel Bomber
iTrader: (1)
The Accelerator Pedal Position Sensor (APPS) is a linear potentiometer. It provides the Engine Control Module (ECM) with a DC voltage signal proportional to the angle, or position of the accelerator pedal. In previous model years, this part was known as the Throttle Position Sensor (TPS). Diesel engines used in previous model years used a mechanical cable between the accelerator pedal and the TPS lever. Linkage and bellcranks between the TPS cable lever and the fuel injection pump were also used. Although the cable has been retained with the APPS, the linkage and bellcranks between the cable lever and the fuel injection pump are no longer used. The APPS is serviced (replaced) as one assembly including the lever, brackets and sensor. The APPS is calibrated and permanently positioned to its mounting bracket.
APPS Sensor Replacement
NOTE--This sensor can be replaced without replacing the bracket.
https://www.genosgarage.com/prodinfo...umber=TPS98502
APPS Sensor Replacement
NOTE--This sensor can be replaced without replacing the bracket.
https://www.genosgarage.com/prodinfo...umber=TPS98502
Last edited by turbo20psi; 11-13-2010 at 09:20 AM.
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
Craigdegolier
24 Valve 2nd Gen Dodge Cummins 98.5-02
7
07-20-2015 04:46 AM