24 Valve misfire? Help!
You can pull the VP and take it to any Authorized Bosch shop and they can test it on the bench to tell you if it's bad or not. I sure would check that valve though. There's another guy in the help section that just found out it was the cause of his problems.
Yep, I just saw that. I looked at it and saw it to be nice and shiny. I also looked in my hardware bin and found the old one, so it was definitly replaced.
I also replaced the IAT and CKS and the same misfire is there. The codes have been cleared and there is nothing coming back after driving.
I also replaced the IAT and CKS and the same misfire is there. The codes have been cleared and there is nothing coming back after driving.
Thread
Thread Starter
Forum
Replies
Last Post
Baradium
Ford 83-94 6.9 and 7.3L General
3
Mar 9, 2015 07:15 PM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
Feb 1, 2015 08:41 PM




