24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

obd2 wont link to ABS.

Thread Tools
 
Search this Thread
 
  #11  
Old 02-25-2014, 06:00 PM
ramrunner01's Avatar
Diesel Enthusiast
Join Date: Jun 2013
Location: Kansas
Posts: 153
Received 4 Likes on 4 Posts
Default

Did you say the brakes aren't working well? Or the lights are just stuck on?
 
  #12  
Old 02-26-2014, 06:45 AM
sixshooter's Avatar
Diesel Fan
Thread Starter
Join Date: Apr 2012
Location: dayton ohio
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

Brakes work just not the antilock they are however a little grabby after it rains or when wet.im gonna do frnt pads and probably shoes soon and see if that helps I think the fronts might be kinda low.
 
  #13  
Old 02-26-2014, 08:01 AM
lilmike1540's Avatar
Diesel Enthusiast
Join Date: Feb 2014
Location: manzanola co
Posts: 195
Received 2 Likes on 2 Posts
Default

When i bought my truck the front calipers were sticking a couple. Of rebuild kits and good as new mine wasnt throwing up a abs light though
 
  #14  
Old 02-26-2014, 11:22 AM
sixshooter's Avatar
Diesel Fan
Thread Starter
Join Date: Apr 2012
Location: dayton ohio
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

Ill look into that too. appreciate the info ill see what I can find out.
 
  #15  
Old 02-26-2014, 12:50 PM
ramrunner01's Avatar
Diesel Enthusiast
Join Date: Jun 2013
Location: Kansas
Posts: 153
Received 4 Likes on 4 Posts
Default

Mine did that I replaced the sensor and still didn't fix it it ended up being the proportion valve had a tiny leak and would throw the light on I would check that

---AutoMerged DoublePost---

There will be a little black rubber cap on the top and than a needle valve under neath it make sure there is no fluid coming out of there
 

Last edited by ramrunner01; 02-26-2014 at 12:50 PM. Reason: Automerged Doublepost
  #16  
Old 02-26-2014, 03:09 PM
sixshooter's Avatar
Diesel Fan
Thread Starter
Join Date: Apr 2012
Location: dayton ohio
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

Ill check that too. But wouldnt it show up in my res. If I had even a small leak after 2years
 
  #17  
Old 02-26-2014, 05:20 PM
ramrunner01's Avatar
Diesel Enthusiast
Join Date: Jun 2013
Location: Kansas
Posts: 153
Received 4 Likes on 4 Posts
Default

Ya I didn't realize it had been two years sounds like it could be a brake booster maybe? Have you tried bleeding your brakes just to see what it does?
 
  #18  
Old 02-26-2014, 05:29 PM
sixshooter's Avatar
Diesel Fan
Thread Starter
Join Date: Apr 2012
Location: dayton ohio
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

im gonna try to do pads this weekend ill bleed em then and see what happens.

checked the valve no sign of any leaks anyway that i can tell.
 

Last edited by sixshooter; 02-26-2014 at 05:31 PM.
  #19  
Old 02-26-2014, 07:43 PM
ramrunner01's Avatar
Diesel Enthusiast
Join Date: Jun 2013
Location: Kansas
Posts: 153
Received 4 Likes on 4 Posts
Default

Just curious did you have someone press the pedal while you watched the needle valve that was the only way i knew mine was leaking
 
  #20  
Old 02-27-2014, 10:20 AM
sixshooter's Avatar
Diesel Fan
Thread Starter
Join Date: Apr 2012
Location: dayton ohio
Posts: 89
Likes: 0
Received 0 Likes on 0 Posts
Default

I did not. I just looked for any sign of fluid.does the needle move visually?
 


Quick Reply: obd2 wont link to ABS.



All times are GMT -5. The time now is 03:58 AM.