hey there was wondering if a silver62 will be a good choice for my cummins. I have a 99 with air dog150, edge comp, 150hp injectors. it's my weeked play truck that i eally never tow with. I'm just worried th silver 62 will be too laggy. Also i plan on doing head studs and aHamiltoncam with 110pound valve springs. Thanks guys

 

It will be have some lag but should be fine since u don't tow.


Luke

 

What's the max boost on that turbo?

 

45-50


Luke

 

damn i thought it would push at least 60.What would give me a better time in a 1/4 mile the phat shaft 62 or the sps or the silver

 

All depends on setup


Luke

 

anyone running the silver 62?

 

it will be hard to get quick spool up with that. consider a 63/65 or a 63/68 for more air and faster spool.

 

go with the silver 62 it will be a lot of fun. I had a 62/71/14 on mine with 110's and I believe I needed a little more fuel it was a little laggy but it came alive on the top. 12.9's out of it. I was making 50 psi out of it

 

the silver is not a very good match for the vp44 powered trucks. the 74mm turbine wheel is pretty big. If you want more air go up a size on the compressor.