• Napa / Wix 3527 & 33527
• Napa / Wix 3697 & 33697
• Napa / Wix 3420 & 33420
• Napa / Wix 3616 & 33616

• CAT 1R-0751
• CAT 1R-0750

• Donaldson P551315

• Baldwin BF1275
• Fleetguard FS19768
• Baldwin BF7634

• FleetGuard FF5324

AirDog FF100-10 FF5617 - Fleetguard 10um absolute, 60GPH
AirDog FF100-5 FF5587 - Fleetguard discontinued
AirDog FF100-3 FF5613 - Fleetguard 5um absolute 60GPH
AirDog WS80 FS19768 - Fleetguard 0% emulsified water/50% free water sep 20 GPH
AirDog WS100 LFF9594 - Luber-Finer 95% free water/75% emulsified water sep 90 GPH


All valid AD filter numbers they all came from a AirDog tech (LowDiesel) on CF.com

Here is one in VP.com...
http://www.vulcanperformance.com/Fue...-p/p551315.htm

 

And all of these will fit? Currently running a napa 3626 and napa 533616 should I just get another set?

---AutoMerged DoublePost---

Changed em. Bought another set of napa filters. $50.80 out the door in Texas. Changed the filter. And truck wouldn't start. Finally cranked back over. After a call to airdog they said I was suppose to fill the water filter up with diesel. Now the truck sits at 14 in idle. And 12 at WOT. Airdog guy said that that was fine for my mods.

 

Yes. Those should all fit...

But as for fuel pressures you should be much higher. I'm idleing at 19 and WOT 17 PSI with a Airdog 150.

Might have to shim the spring and check to be sure the ball isn't crush in the coil of the spring.

 

I have a baby airdog 100

 

Shouldn't matter. You can still shim a AD 100 or change springs.