24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

Truck WILL NOT turn over..

Thread Tools
 
Search this Thread
 
  #21  
Old 01-30-2013, 10:40 AM
RAW's Avatar
RAW
RAW is offline
Administrator

iTrader: (1)
Join Date: Aug 2009
Location: Alberta
Posts: 6,218
Received 684 Likes on 549 Posts
Default

Nope, I don't hear that. Could be the grid heater relays below the drivers battery.
 
  #22  
Old 01-30-2013, 10:44 AM
AlaskanRenegade's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2012
Location: Wasilla, AK
Posts: 92
Received 3 Likes on 3 Posts
Default

True, but I replaced it.. my WTS light comes on now..maybe a bad wire?..
 
  #23  
Old 01-30-2013, 10:53 AM
RAW's Avatar
RAW
RAW is offline
Administrator

iTrader: (1)
Join Date: Aug 2009
Location: Alberta
Posts: 6,218
Received 684 Likes on 549 Posts
Default

"It"? There are two of those relays.
 
  #24  
Old 01-30-2013, 10:57 AM
AlaskanRenegade's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2012
Location: Wasilla, AK
Posts: 92
Received 3 Likes on 3 Posts
Default

This is IT with the two
Name:  IMG_5025_zps5e498d83.jpg
Views: 57
Size:  237.9 KB
Don't mind the 4" - 5" adapter.. or the fat f*** cat!
 
  #25  
Old 01-30-2013, 11:01 AM
RAW's Avatar
RAW
RAW is offline
Administrator

iTrader: (1)
Join Date: Aug 2009
Location: Alberta
Posts: 6,218
Received 684 Likes on 549 Posts
Default

Gotchya, the assembly. So they work properly now?

Growling was happening, growling stopped, those were replaced? Growling could have coe from them.
 
  #26  
Old 01-30-2013, 11:12 AM
AlaskanRenegade's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2012
Location: Wasilla, AK
Posts: 92
Received 3 Likes on 3 Posts
Default

Yep, my WTS light comes on and then cycles off after the set time(depending on how cold it is)
Hmm.. possible. I'll have to have my buddy come over with his 99 so I can see if his does it!

I'm goin bat s*** crazy bein stuck at this apartment..
Still not light out yet so I'm searchin around like crazy. I'm workin outside, parked on a effin snowbank..
 
  #27  
Old 01-30-2013, 01:47 PM
Bryce's Avatar
Diesel Enthusiast
Join Date: Sep 2012
Location: Carl Junction, MO
Posts: 403
Received 28 Likes on 26 Posts
Default

Here is the ecm-vp44 data link diagram
Name:  VP-44toECMwiring_zps787488a6.jpg
Views: 55
Size:  42.1 KB

Is the truck cranking with the key or are you still jumping the starter?
 
  #28  
Old 01-30-2013, 02:08 PM
AlaskanRenegade's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2012
Location: Wasilla, AK
Posts: 92
Received 3 Likes on 3 Posts
Default

Nothing with the key, I just tried jumping it to check the starter again, that still turns the starter. Outside with it right now
 
  #29  
Old 01-30-2013, 02:39 PM
Bryce's Avatar
Diesel Enthusiast
Join Date: Sep 2012
Location: Carl Junction, MO
Posts: 403
Received 28 Likes on 26 Posts
Default

Check fuse 9 & 11 in the dash and fuse 9 under the hood.
 
  #30  
Old 01-30-2013, 03:21 PM
AlaskanRenegade's Avatar
Diesel Fan
Thread Starter
Join Date: Sep 2012
Location: Wasilla, AK
Posts: 92
Received 3 Likes on 3 Posts
Default

Checked em already.
Even just went out and checked em again. All good..

Think I'm taking the 08 6.7L to go grab a code reader from my buddy again. Hopefully he's not busy!
 


Quick Reply: Truck WILL NOT turn over..



All times are GMT -5. The time now is 09:16 PM.