Edge Fuel Pressure
#1
Edge Fuel Pressure
OK. So I'm tryin' to get this edge insight digital gauges ( only, no chip, no attitude ) installed.
Confused as to where to mount the electric fuel pressure sender. I've read thread upon thread saying it should go at the VP44, but I noticed Geno's has an installation instruction for mounting it atop the fuel filter canister??? Do I need this snubber set-up with an electric gauge? Tapped banjo?
I'm stock with the exception of I have a Fass DDRP remotely mounted on the frame and the OEM lift pump has been removed.
Here's a couple of pix showing the lines on my VP44. If someone has pix of a preferred installation, any help would be appreciated.
Thanx all,
SD
#4
Don't have to have a snubber valve. The rear banjo bolt (one closest to the filter housing) is the inlet. http://articles.mopar1973man.com/2nd...overflow-valve
I would also recommend at least upgrading your fuel line from the filter to the VP, it would be best to upgrade the entire fuel line to 1/2" as well.
This also has a tap for an 1/8 npt for fuel pressure hook up. Universal Big Line Filter to Injection Pump Kit w/ fuel pressure access
I would also recommend at least upgrading your fuel line from the filter to the VP, it would be best to upgrade the entire fuel line to 1/2" as well.
This also has a tap for an 1/8 npt for fuel pressure hook up. Universal Big Line Filter to Injection Pump Kit w/ fuel pressure access
Last edited by H.R.D; 11-29-2012 at 05:33 PM.
#5
Thread
Thread Starter
Forum
Replies
Last Post
2gCummins
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
12-08-2014 06:02 PM