i got a 99 2500 cummins with edge with attitude mbrp exhaust and airdog2 165 my next step is stage 3 trans i was wondering before i upgraded turbo and injectors what stock parts wouldnt handle this power and would also need upgrading before i do this also any ideas on injectors and turbo for the turbo i was looking at super b and for injectors dont know a brand yet just that i want 150hp ones preferlibly

 

Well you are on the right track. I would consider getting head studs and for injectors i would give Luke a call I think at Diesel Dawg Performance he has some great injectors. For a turbo a 62mm turbo would be good or give Torque Diesel a call n he can set you up with any kind of turbo you want.Hope this helps.

 

What kind of power are you getting out of the Edge with the 165 lift pump. im about to do the same thing. i alread have the mbrp exaust. kinda have the same plan as you.

 

The edge should be around 95rwhp I think but I could be wrong.

 

I have about 325 hp could be more thats just an estimate....and i got about 800 pounds of torque but this is all estimates but are not far off of actual ill tell you right now if your doing these get a trans and the airdog 2 165 makes your throttle response excellent and adds good power too considering you get garden hose fuel lines