24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

Injector and turbo help

Old Aug 21, 2012 | 03:43 AM
  #1  
jfollowell's Avatar
Thread Starter
|
Diesel Fan
Joined: Feb 2010
Posts: 39
Likes: 0
Default Injector and turbo help

Hey guys lookin to buy a set of injectors proly gonna go with ddp 100's/150's can't really make up my mind. I'm also thinking of the ats aurora4000. Would this be a good setup or which turbo would yall recomend. Only looking to get about 400-500hp out of her.Truck is 02 5spd, edge comp,4" tbe, Fass titanium 150. Thanks
 
Reply
Old Aug 22, 2012 | 04:55 AM
  #2  
globalwarmingcontributor's Avatar
Diesel Enthusiast
Joined: Nov 2011
Posts: 194
Likes: 12
From: Illinois
Default

if your only looking for about 4-500hp on your rig, id look into an industrial injection 62mm turbo with a set of 100hp injectors. that would be a good stack with your edge comp and Fass pump. i wouldnt go with anything bigger than a 62mm though, reason being is because anything bigger may be laggy off the line, and may be rough if towing
 
Reply
Old Aug 22, 2012 | 07:12 AM
  #3  
Diesel Dawgs Performance's Avatar
Joined: Mar 2007
Posts: 14,546
Likes: 843
From: Western NC
Default

Ya a 62mn Turbo and 100s should get you in the low 400hp range.

Luke
 
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:35 PM.