Diesel Bombers - THE VE PUMP AND YOU.......

Page 3 of 4

Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)

- 1st Generation Dodge Cummins 89-93 (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/)

- - THE VE PUMP AND YOU....... (https://www.dieselbombers.com/1st-generation-dodge-cummins-89-93/9297-ve-pump-you.html)

jshafley

10-04-2009 02:29 PM

great tips guys

big bad diesel 416

10-05-2009 01:05 AM

Robert Bosch VE-type Injection Pump

Turning up the pre 94 Ram diesel injector pump

carlosrivero71

10-22-2009 04:32 PM

Is it critical to have the AFC spring? The mechanic who did my install threw it away and I don't know where to find a replacement.

tower_ofpower

10-22-2009 05:49 PM

not crucial; theres a member running around with out one. unscrew the starwheel and go to the hardware store and find a spring; it doesnt even have to be the same spring rate probably an inch 1/2 long. just enough to push the fuel pin back up if your worried about it. it just gives you quick low end fueling kinda like running a P pump with the AFC gutted.

hiboy_76

01-03-2010 03:39 PM

I was told to take out the screw on the drivers side of the pump (its right beside the idle screw, just on the drivers side). Is that the screw on the driver's side that's reffered to on in the black lettering? The one I'm talking about has a little cover on one end.

Thanks

RSWORDS

01-03-2010 04:25 PM

Yes

IC Smoke

01-03-2010 10:56 PM

excellent job Logan!

MRmr	05-11-2010 01:02 PM

Thank you Logan I am new to the diesel world and I wanted to know how to tweek my pump thanks for saving me an engine LOL :c:

coalrollin12v

05-30-2010 08:45 AM

thanks logan. they should make this a sticky

DIRTYMAX2004

05-30-2010 09:11 AM

it is in a sticky thread. it is located here:tu:

All times are GMT -5. The time now is 05:12 PM.

Page 3 of 4

Show 40 post(s) from this thread on one page