Help with anyone looking for banjo bolts
#1
Help with anyone looking for banjo bolts
okay so a few days ago i broke my banjo bolt that goes into my AFC . i have been doing some sniffing around with no luck bc it is a discontinued part thru Dodge . Then today i was passing thru my town and i saw our International truck center, got to thinking they also are a Cummins place too. i figured it was worth a shot and i got lucky. all i had to do was give them my engine serial # then he matched the # with the part # i needed and my new banjo bolt is in the mail and will be here tommorrow. . . i will post how much i paid for it and all tomorrow . . . well i hope this helps any of yall out if ya run into the same problem.
The following users liked this post:
New_Dog_93 (02-22-2012)
#3
Thats if you want to replace the OEM setup. Alot of guys are fabbing a aftermarket setup. I used 1/4" OD nylon air brake hose and fittings from a hardware store, works good and you can flip the top out of the way when doing any work without removing banjo bolts. I didnt bother looking for the banjo bolts, Good looking out though!
#4
This is a great guy ive been dealing with for a couple months now for my cummins build. He sells used cummins parts....Check his site he might have what your looking for....Everything Ive been buying from him is in perfect condition. he doesnt sell anything bad,he tests it all before he takes things apart. He is in Arkansas,and came here to Jersey on a road trip to deliver my head. Met him personally.Good guy
Kalos used cummins parts Home Page
Kalos used cummins parts Home Page
Last edited by MudDrivermike; 02-24-2012 at 06:38 PM.
Thread
Thread Starter
Forum
Replies
Last Post
2500HeavyDuty
Chevy/GMC Duramax 01-04 LB7
238
12-06-2017 05:16 PM
BCOWANWHEELS
Wanted To Buy (WTB) - Used
0
12-11-2014 07:29 PM